Documents by Year
1980s (2)
1990s (87)
2000s (2207)
2010s (7288)
2020s (417)
Other (16)

ST RK

ST RK ISO 4126-2-2010
ST RK ISO 4126-2-2010
Protective mechanisms for protection against excessive pressure. Part 1. Blow-out disc safety gear. General technical requirements. Testing methods
ST RK ISO 4126-3-2010
ST RK ISO 4126-3-2010
Protective mechanisms for protection against excessive pressure. Part 1. Relief valve kits and Burst disc safety device kits. General technical requirements
ST RK ISO 4126-4-2010
ST RK ISO 4126-4-2010
Protective mechanisms for protection against excessive pressure. Part 1. Pilot relief valves. General technical requirements
ST RK ISO 4126-5-2010
ST RK ISO 4126-5-2010
Protective mechanisms for protection against excessive pressure. Part 1. Controlled pressure relieve protection system(csprs). General technical requirements. Testing methods
ST RK ISO 4126-6-2010
ST RK ISO 4126-6-2010
Protective mechanisms for protection against excessive pressure. Part 1. Application, selection and installation of bursting disk safety devices
ST RK ISO 4126-7-2010
ST RK ISO 4126-7-2010
Protective mechanisms for protection against excessive pressure. Part 1. General data
ST RK ISO 4643-2010
ST RK ISO 4643-2010
Personal safety equipment. Plastic cast footwear. Work boots of polyvinilchloride. Specification
ST RK ISO 4759-1-2010
ST RK ISO 4759-1-2010
Fasteners. Tolerances. Part 1. Bolts, screws, pins and nuts. Product grades A, B and C
ST RK ISO 501-2010
ST RK ISO 501-2010
Coal. Determination of the free swell index
ST RK ISO 5073-2010
ST RK ISO 5073-2010
Brown coals and lignites. Determination of humic acids
ST RK ISO 5208-2010
ST RK ISO 5208-2010
Industrial valves. Metallic valves pressure test
ST RK ISO 5211-2010
ST RK ISO 5211-2010
Industrial valves. Connection of drives of partial rotation
ST RK ISO 5433-2010
ST RK ISO 5433-2010
Leather. Untreated wet bull skins. Specification
ST RK ISO 5492-2010
ST RK ISO 5492-2010
Sensor analysis (organoleptic). Glossary
ST RK ISO 5666-2010
ST RK ISO 5666-2010
Environment protection. Hydrosphere. Determination of mercury content
ST RK ISO 567-2010
ST RK ISO 567-2010
Solid fuel. Coke. Determination of volume weight in a small container
ST RK ISO 5781-2010
ST RK ISO 5781-2010
Hydraulic drives. Pressure reduction valves, pressure sequence valves, discharge valves, throttle valves and back pressure valves. Mounting surfaces
ST RK ISO 5815-1-2010
ST RK ISO 5815-1-2010
Water Quality. Hydrosphere. Determination of biochemical oxygen demand after n days (BOD n ). Part 1. Dilution and sowing method with addition of allylthiourea
ST RK ISO 5815-2-2010
ST RK ISO 5815-2-2010
Environment protection. Hydrosphere. Determination of biochemical oxygen demand after n days (BOD n ). Part 1. Method for undiluted samples
ST RK ISO 5971-2010
ST RK ISO 5971-2010
Designation of cloth sizes Pantyhoses
ST RK ISO 6002-2010
ST RK ISO 6002-2010
Steel valves with a a bolted bonnet. General technical requirements. Testing methods
ST RK ISO 616-2010
ST RK ISO 616-2010
Solid fuel. Coke. Determination of crushing index
ST RK ISO 6326-1-2010
ST RK ISO 6326-1-2010
Natural gas. Sulphur compounds content determination. Part 1. General introduction. Put into effect in substitution of ST RK ISO 6326-1-2004
ST RK ISO 6370-1-2010
ST RK ISO 6370-1-2010
Vitreous and porcelain enamels. Determination of abrasion resistance. Part 1. Abrasion resistance test equipment
ST RK ISO 6506-1-2010
ST RK ISO 6506-1-2010
Metallic materials. Brinell hardness test. Part 1. Testing methods. Put into effect in substitution of ST RK 1780-1-2008
ST RK ISO 6508-1-2010
ST RK ISO 6508-1-2010
Metals and alloys. Rockwell hardness test. Part 1. Measurement Method
ST RK ISO 6551-2010
ST RK ISO 6551-2010
Oil liquids and gases. Confidence and measurement accuracy on flow. Data transfer in pulse form through a cable
ST RK ISO 6584-2010
ST RK ISO 6584-2010
Air- or other gases-purification equipment. Dust collectors classification
ST RK ISO 6741-1-2010
ST RK ISO 6741-1-2010
Textile. Fibre and yarn. Determination of butch trade weight. Part 1. Determination of weight and calculations
ST RK ISO 6741-2-2010
ST RK ISO 6741-2-2010
Textile. Fibre and yarn. Determination of butch trade weight. Part 1. Laboratory samples taking methods
ST RK ISO 6741-3-2010
ST RK ISO 6741-3-2010
Textile. Fibre and yarn. Determination of butch trade weight. Part 1. Sample purification methods. Textile.
ST RK ISO 6741-4-2010
ST RK ISO 6741-4-2010
Fibre and yarn. Determination of butch trade weight. Part 1. Values using for calculation of commercial tolerances and normal amount of moisture
ST RK ISO 6768-2010
ST RK ISO 6768-2010
Environment protection. Atmosphere. Method for determination nitrogen oxide (IV)
ST RK ISO 6892-1-2010
ST RK ISO 6892-1-2010
Metallic materials. Tensile test methods Part 1. Room-temperature test
ST RK ISO 6934-1-2010
ST RK ISO 6934-1-2010
Steel reinforcement for prestressed concrete. Part 1. General requirements
ST RK ISO 6934-2-2010
ST RK ISO 6934-2-2010
Steel reinforcement for prestressed concrete. Part 1. Cold-drawn wire
ST RK ISO 7005-1-2010
ST RK ISO 7005-1-2010
Metal flanges. Part 1. Steel Flanges
ST RK ISO 7005-2-2010
ST RK ISO 7005-2-2010
Metal flanges. Part 1. Flanges of foundry cast iron
ST RK ISO 7005-3-2010
ST RK ISO 7005-3-2010
Metal flanges. Part 1. Flanges of copper alloys and composite materials
ST RK ISO 7121-2010
ST RK ISO 7121-2010
Industrial steel ball valves of general purpose. General technical requirements. Testing methods
ST RK ISO 7152-2010
ST RK ISO 7152-2010
Tourist tents and sheds for home trailers. Glossary and list of equivalent terms
ST RK ISO 7211.5-2010
ST RK ISO 7211.5-2010
Materials, textile fabrics. Structure. Analysis methods. Part 1. Determination of linear density of the thread removed of fabric
ST RK ISO 7211.6-2010
ST RK ISO 7211.6-2010
Textile materials. Fabrics. Structure. Analysis methods. Part 1. Determination of the weight of the main and filling threads per a fabric area unit
ST RK ISO 728-2010
ST RK ISO 728-2010
Solid fuel. Coke. Sieve analysis (nominal top size more than 20 mm)
ST RK ISO 7409-2010
ST RK ISO 7409-2010
Fertilizers. Marking. Presentation and appearance
ST RK ISO 7511-2010
ST RK ISO 7511-2010
Plastic pipeline systems. Pipes and fittings of thermosetting fibre-glass plastics (grp). Testing methods for walls airtightness inspection under effect of short-term inner pressure
ST RK ISO 7708-2010
ST RK ISO 7708-2010
Air quality. Determination of factions according to particles size for sampling for health care
ST RK ISO 7731-2010
ST RK ISO 7731-2010
Ergonomics. Alarm signals for personnel in public places. Auditory alarm signals

All Codes and Regulations

MSP PST RK RK Codes RK Laws SN RK TR EAES
NTP RK PUE RK Decisions RK Letters SNiP RK
Other RK norms R RK RK Decrees RK Orders SP RK
PR RK RDS RK RK Instructions RK Resolutions ST RK

All Categories

Construction (Max) Highways (Max) National Standards for KGS (State Standards Classification) Projects of works (PPR) on bridges Technical Supervision
Construction Price Formation ISO classifier Organization Standards PromExpert Welding regulations
Evidence base (TR CU, Technical Regulation of the Customs Union) National standards Power industry Standards for pipe fittings (TPA)

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!